• Universal “Chopsticks” Quick View
    • Universal “Chopsticks” Quick View
    • ,
    • Universal “Chopsticks”
    • $50.00
    • *Interchangeable inserts accept all common size rod bolts (one size fits all): 5/16”, 3/8”, 11/32”, & 7/16” *Extended length allows operator to “GUIDE” assembly into place *Eliminates nicked or damaged cranks *Speeds up assembly and makes short block assembly a lot easier *Color coded inserts for easy identification *1/2” anodized aluminum ~ 7” overall length
    • Call To Place Order
  • UNIVERSAL POINTER Quick View
  • VALVE GAPPER VALVE GAPPER Quick View
    • VALVE GAPPER VALVE GAPPER Quick View
    • ,
    • VALVE GAPPER
    • $275.00
    • This handy tool allows you to gap your valves w/.001” accuracy. Feeler gauges take just that “a feel”. Ask three people to run valves with a feeler gauge and you will get three different results. * Anodized Aluminum *Complete with attachment rings for: 1.400”, 1.437”, 1.500”, 1.575” retainer (others available) * Starrett indicator for precise accuracy & wedge for milled…
    • Call To Place Order
  • Valve Opening Comparator & Transfer Gauge Quick View
    • Valve Opening Comparator & Transfer Gauge Quick View
    • ,
    • Valve Opening Comparator & Transfer Gauge
    • $35.00
    • This is a straightforward tool that performs a VERY VITAL job in flycutting pistons. It is very critical that the valve relief in the piston is the same angle as the valve in the head ~ especially on high RPM applications where piston-to-valve clearance is at a minimum. Usually, if you float the valves and they hit the piston squarely,…
    • Call To Place Order
  • Valve Seat Vacuum Tester Quick View
    • Valve Seat Vacuum Tester Quick View
    • ,
    • Valve Seat Vacuum Tester
    • $300.00
    • I don’t care who does your head work. If they can’t seal the valves, something is very wrong and you need to catch the problem and correct it BEFORE engine assembly. Several companies make a vacuum tester, but we took the time to design a real nice unit that fits the needs of a race car. This unit was designed…
    • Call To Place Order
  • Wire Bender Quick View
    • Wire Bender Quick View
    • ,
    • Wire Bender
    • $100.00
    • Secure bender to workbench or clamp in a vise. Lay up to 1/4” O.D. Wire between the two pins in the base and slide handle over the 3/8” pin. Insert the 5/16” pin (with plastic cap) into handle and to the side of the wire to be bent. Make bend by pulling handle toward you. Placement of the 5/16” dowel…
    • Call To Place Order
  • YOKE SUPPORT FOR PINION NUT YOKE SUPPORT FOR PINION NUT Quick View
Call Now ButtonCall Now
×
×

Cart