• Mini Valve Spring Tester Quick View
  • OIL FILTER CUTTER Quick View
    • OIL FILTER CUTTER Quick View
    • ,
    • OIL FILTER CUTTER
    • $60.00
    • This is a good one! There are a ton of these on the market, and most are junk. The three-point nesting allows for very smooth cutting ~ as opposed to the tools with a plug that locates off the center of the filter. This unit will work on virtually ANY filter
    • Call To Place Order
  • Oil Pump Pick Up Tube Installer Quick View
    • Oil Pump Pick Up Tube Installer Quick View
    • ,
    • Oil Pump Pick Up Tube Installer
    • $50.00
    • Allows easy installation of pickup tube in the pump. A job that can sometimes turn into a frustrating endeavor. The tool is machined from carbon steel and heattreated for long life. There is a brass insert in the end of the tool which prevents tearing it up on the hammered surface. Fits Big Block & Small Block Chevrolet
    • Call To Place Order
  • OPTICAL CENTER PUNCH Quick View
    • OPTICAL CENTER PUNCH Quick View
    • ,
    • OPTICAL CENTER PUNCH
    • $90.00
    • This is one of the handiest layout tools you can have in your tool box. You can center punch scribed lines with unbelievable accuracy. * Simply place cone over your scribed lines * Insert magnifier & align scribed lines with the cross lines on the bottom of the magnifier. * Hold cone in position, remove the magnifier and insert center…
    • Call To Place Order
  • PICK SET Quick View
    • PICK SET Quick View
    • ,
    • PICK SET
    • $30.00
    • All of us have enjoyed the task of removing Spiral Loks from the pistons. This little kit will take a lot of work out of this frustrating chore. You will find hundreds of uses for this pick set.   Made in the USA Heat-treated tool steel w/ an aluminum handle and handy magnet inserted in the handle end.   The…
    • Call To Place Order
  • PINION DEPTH SETTING TOOL PINION DEPTH SETTING TOOL Quick View
    • PINION DEPTH SETTING TOOL PINION DEPTH SETTING TOOL Quick View
    • ,
    • PINION DEPTH SETTING TOOL
    • $150.00
    • After many hours of development and testing, we have finally devised a truly universal pinion setting fixture without the use of spools, bars, etc.  This tool is quick to set up and is ACCURATE. Works on GM - 10 & 12 bolts.  Early GM, Ford 9", 8.8" and 7.5", Chrysler 8 3/4", Dana and many others. Mounting distances are provided…
    • Order Online
  • PINION DEPTH SETTING TOOL INSTRUCTIONAL VIDEO ~ DVD Quick View
    • PINION DEPTH SETTING TOOL INSTRUCTIONAL VIDEO ~ DVD Quick View
    • ,
    • PINION DEPTH SETTING TOOL INSTRUCTIONAL VIDEO ~ DVD
    • $40.00
    • This is a step-by-step instructional video covering the set up and use of the Pinion Depth Setting Tool, along with difficult to obtain rearend buildup procedure and information. Gear nomenclature Gearset applications Patterns Helpful Hints Torque Specifications ENHANCES INSTALLATION OF A RING AND PINION PINION DEPTH SETTING TOOL SOLD SEPARATELY
    • Order Online
  • Piston Arbor Quick View
    • Piston Arbor Quick View
    • ,
    • Piston Arbor
    • $60.00
    • This tool is used in the lathe to cut pistons for “Tru Arcs” if you are changing from pressed to floated pins. Some customers have asked about bolting the tool to a piece of angle iron and using it as a piston vise in a mill ~ we sell a real piston vise. However, it does work well for holding…
    • Call To Place Order
  • Piston Ring Filer Quick View
    • Piston Ring Filer Quick View
    • ,
    • Piston Ring Filer
    • $60.00
    • This offers a quick and efficient means of properly filing ring end gaps. *Grinds the ring from the outside to the inside *Both sides of the gap are ground in one operation and are held parallel. *Replaceable carbide blade *Easily bolts to bench for hands-free operation $20  Piston Ring Filer Replacement Blades
    • Call To Place Order
  • Piston Vise Piston Vise Quick View
    • Piston Vise Piston Vise Quick View
    • ,
    • Piston Vise
    • $700.00
    • Nothing on the market today compares with the quality of this vise. This is the best constructed, most rigid vise available for flycutting or milling pistons. CHECK OUT THESE FEATURES: Set up is off of the pin hole which insures that all pistons will be positioned the same. Superior engineering and workmanship assures excellent repeatability. Only the highest quality materials…
    • Call To Place Order
  • Port Radiusing Mandrel & PSA Discs Quick View
    • Port Radiusing Mandrel & PSA Discs Quick View
    • ,
    • Port Radiusing Mandrel & PSA Discs
    • $45.00
    • $25  Port Radiusing Mandrel $20  PSA Discs  Available Grits:  40/60/80/120  (Box of 100) Port Radiusing Mandrel & PSA Discs This is a unique little mandrel we came up with for polishing ports & mandrels. It is used by placing PSA discs (sold separately) back-to-back on the arbor with spacers in between them so you have a two-sided cutting disc. This…
    • Call To Place Order
  • PUSHROD LENGTH CHECKER Quick View
    • PUSHROD LENGTH CHECKER Quick View
    • ,
    • PUSHROD LENGTH CHECKER
    • $150.00
    • Correct pushrod length is a vital part of rocker arm geometry, and is also one of the most overlooked steps in engine building.  Poor rocket geometry is probably the major cause in valve train failure.  Until now, no one has made a tool for checking pushrod length ~ it is a difficult job with calipers, etc. Well, no more excuses! …
    • Purchase on Ebay store
Call Now ButtonCall Now
×
×

Cart