• DIAL INDICATOR Quick View
    • DIAL INDICATOR Quick View
    • ,
    • DIAL INDICATOR
    • $40.00
    • One Inch Travel * .001 Increments * Revolution Counter * Stainless Steel Stem *Satin finish chrome-plated forged brass body * Hardened, ground, chromeplated tool steel contact point * Hardened stainless steel spindle rack, pinions & pivots ensure long wear & perfect accuracy *Accuracy meets federal specifications *Easy-to-read black graduations * Knurled bezel for smooth adjustment *Knurled clamp screw for setting
    • Call To Place Order
  • Dial Indicator Extensions Dial Indicator Extensions Quick View
  • Digital Inclinometer – Smart Level Quick View
    • Digital Inclinometer – Smart Level Quick View
    • ,
    • Digital Inclinometer – Smart Level
    • $125.00
    • This is an amazing tool for the price. Perfect for machine shops or chassis builders. Works great for leveling heads and blocks for surfacing, setting drive shaft and pinion angles, setting wing angles or checking caster and camber angles. The tool will repeat within .1 degree (one tenth of one degree) accuracy. It will also zero at any angle and…
    • Call To Place Order
  • Edge Finder Quick View
    • Edge Finder Quick View
    • ,
    • Edge Finder
    • $40.00
    • for Bridgeport-Type Mill This is sort of a gimmick.....but it works like a charm ~ within .0001 of contact . A “clicking” no ise is emitted when the edge is found. It really allows you to use both your eyes & ears for location. Repeats every time! Within .0001 accuracy!
    • Call To Place Order
  • EFFECTIVE USES OF THE BRIDGEPORT TYPE MILL Quick View
    • EFFECTIVE USES OF THE BRIDGEPORT TYPE MILL Quick View
    • ,
    • EFFECTIVE USES OF THE BRIDGEPORT TYPE MILL
    • $79.00
    • This 3-Part Video Series is loaded with tips on how to get the most from your vertical mill. Presented by Adrian Pendergrass with over 20 years of experience of "hanging on the end of a lathe and a mill". Perfect for home, shop or vocational use. Designed to increase your confidence and make you want to use your mill.
    • Order Online
  • ENGINE BALANCING FIXTURE Quick View
    • ENGINE BALANCING FIXTURE Quick View
    • ,
    • ENGINE BALANCING FIXTURE
    • $300.00
    • Any machine shop will agree that the time consuming part of balancing an engine is weighing and equalizing the rods and pistons.  Spinning the crank and adding Mallory or drilling to remove weight is the easy part.  The PMS Balancing Fixture allows you to do all of the time consuming (expensive) work yourself.  You can now take your crank, harmonic…
    • Order Online
  • Engine Turning Tool Engine Turning Tool Quick View
    • Engine Turning Tool Engine Turning Tool Quick View
    • ,
    • Engine Turning Tool
    • $40.00
    • After building a few engines, you come up with little goodies like this engine turning tool that make the job a lot easier. If you read the handle of a new “Snap On” screwdriver, it states “Warning: NOT a Pry Bar or Punch.” This tool also eliminates the search for a longer bolt because you just stripped the first1 ½”of…
    • Call To Place Order
  • FIBER STONES FOR ALUMINUM Quick View
    • FIBER STONES FOR ALUMINUM Quick View
    • ,
    • FIBER STONES FOR ALUMINUM
    • $8.00
    • This is a new fiber-bond mounted wheel developed by Norton Abrasives. It was designed to clean up aluminum castings in foundries. It is not a rotary file for porting, but does a real good job of replacing sanding rolls for cleaning up and smoothing ports and manifolds. Use with WD-40 Stones are available in ½” & 5/8” diameter 1” long…
    • Call To Place Order
  • Flow Bench Valve Opening Fixture Quick View
    • Flow Bench Valve Opening Fixture Quick View
    • ,
    • Flow Bench Valve Opening Fixture
    • $175.00
    • Finally a truly universal fixture for your flow bench. Now you need only one valve opening fixture for ALL heads! *Rigid design ~ will not flex, bend or slip *Easily control opening height to .001” *Plenty of travel for the biggest cams *Works on canted or straight valve applications *Complete with specially modified dial indicator, 3/8” & 7/16” stud adaptors…
    • Call To Place Order
  • Flycutter Scribe Quick View
    • Flycutter Scribe Quick View
    • ,
    • Flycutter Scribe
    • $35.00
    • This handy little unit is a helpful accessory to your piston vise and flycutting tools. The valve diameter and clearance can be preset with a ruler or calipers and transferred to the piston dome by chucking the scribe in the mill and bluing the top of the piston to be cut. The diameter can be located correctly on the piston…
    • Call To Place Order
  • FLYCUTTER SET Quick View
    • FLYCUTTER SET Quick View
    • ,
    • FLYCUTTER SET
    • $50.00
    • This fixture is a big help when it comes to torquing the pinion nut on a 9” Ford (works on others as well).   Eliminates the need for pipe wrenches, etc. and saves a lot of skinned knuckles. Made of aluminum and anodized for appearance and durability.
    • Call To Place Order
  • Flycutter Setting Fixture Quick View
Call Now ButtonCall Now
×
×

Cart