• Fiber Stones for Aluminum Quick View
    • Fiber Stones for Aluminum Quick View
    • ,
    • Fiber Stones for Aluminum

    • $8.00
    • This is a new fiber-bond mounted wheel developed by Norton Abrasives. It was designed to clean up aluminum castings in foundries. It is not a rotary file for porting, but does a real good job of replacing sanding rolls for cleaning up and smoothing ports and manifolds. Use with WD-40 Stones are available in ½” & 5/8” diameter 1” long…
    • Call To Order
  • Flow Bench Valve Opening Fixture Quick View
    • Flow Bench Valve Opening Fixture Quick View
    • ,
    • Flow Bench Valve Opening Fixture

    • $175.00
    • Finally a truly universal fixture for your flow bench. Now you need only one valve opening fixture for ALL heads! *Rigid design ~ will not flex, bend or slip *Easily control opening height to .001” *Plenty of travel for the biggest cams *Works on canted or straight valve applications *Complete with specially modified dial indicator, 3/8” & 7/16” stud adaptors…
    • Call To Place Order
  • Flycutter Scribe Quick View
    • Flycutter Scribe Quick View
    • ,
    • Flycutter Scribe

    • $35.00
    • This handy little unit is a helpful accessory to your piston vise and flycutting tools. The valve diameter and clearance can be preset with a ruler or calipers and transferred to the piston dome by chucking the scribe in the mill and bluing the top of the piston to be cut. The diameter can be located correctly on the piston…
    • Call To Place Order
  • FLYCUTTER SET Quick View
    • FLYCUTTER SET Quick View
    • ,
    • FLYCUTTER SET

    • $50.00
    • This fixture is a big help when it comes to torquing the pinion nut on a 9” Ford (works on others as well).   Eliminates the need for pipe wrenches, etc. and saves a lot of skinned knuckles. Made of aluminum and anodized for appearance and durability.
    • Call To Place Order
  • Four-In-One Head ToolFour-In-One Head Tool Quick View
    • Four-In-One Head ToolFour-In-One Head Tool Quick View
    • ,
    • Four-In-One Head Tool

    • $200.00
    • This tool is the head work's "Best Friend" The four-in-one tool is a must if you are doing complete valve jobs, touching up seats, or just checking another shop’s work. CONCENTRICITY: Quickly & accurately measure valve seat “runout”. SEAT DEPTH: Valve seat depth consistency between cylinders is an absolute must to compression ratio & piston to valve clearance This tool…
    • Call To Order
  • JAR OPENER Quick View
    • JAR OPENER Quick View
    • ,
    • JAR OPENER

    • $40.00
    • Effortlessly open any jar lid from 1/2" Tabasco Sauce jars to the large 4 1/2" gallon pickle jars NO CHEAP PLASTIC OR WOOD USED HERE! Manufactured totally in the USA by PMS from CNC billet aluminum -- stainless and high speed steel Clear ANODIZED for appearance and durability Easily mounts under any cabinet or shelf (mounting screws included) -- takes…
    • Order Online
  • MANUAL VALVE SPRING COMPRESSOR Quick View
  • OIL FILTER CUTTER Quick View
    • OIL FILTER CUTTER Quick View
    • ,
    • OIL FILTER CUTTER

    • $60.00
    • This is a good one! There are a ton of these on the market, and most are junk. The three-point nesting allows for very smooth cutting ~ as opposed to the tools with a plug that locates off the center of the filter. This unit will work on virtually ANY filter
    • Call To Place Order
  • Oil Pump Pick Up Tube Installer Quick View
    • Oil Pump Pick Up Tube Installer Quick View
    • ,
    • Oil Pump Pick Up Tube Installer

    • $50.00
    • Allows easy installation of pickup tube in the pump. A job that can sometimes turn into a frustrating endeavor. The tool is machined from carbon steel and heattreated for long life. There is a brass insert in the end of the tool which prevents tearing it up on the hammered surface. Fits Big Block & Small Block Chevrolet
    • Call To Place Order
  • Optical Center Punch Quick View
    • Optical Center Punch Quick View
    • ,
    • Optical Center Punch

    • $90.00
    • This is one of the handiest layout tools you can have in your tool box. You can center punch scribed lines with unbelievable accuracy. * Simply place cone over your scribed lines * Insert magnifier & align scribed lines with the cross lines on the bottom of the magnifier. * Hold cone in position, remove the magnifier and insert center…
    • Call To Order
  • PICK SET Quick View
    • PICK SET Quick View
    • ,
    • PICK SET

    • $30.00
    • All of us have enjoyed the task of removing Spiral Loks from the pistons. This little kit will take a lot of work out of this frustrating chore. You will find hundreds of uses for this pick set.   Made in the USA Heat-treated tool steel w/ an aluminum handle and handy magnet inserted in the handle end.   The…
    • Call To Place Order
  • PINION DEPTH SETTING TOOLPINION DEPTH SETTING TOOL Quick View
    • PINION DEPTH SETTING TOOLPINION DEPTH SETTING TOOL Quick View
    • ,
    • PINION DEPTH SETTING TOOL

    • $150.00
    • After many hours of development and testing, we have finally devised a truly universal pinion setting fixture without the use of spools, bars, etc.  This tool is quick to set up and is ACCURATE. Works on GM - 10 & 12 bolts.  Early GM, Ford 9", 8.8" and 7.5", Chrysler 8 3/4", Dana and many others. Mounting distances are provided…
    • Order Online