• Alignment Tool for Bridgeport-Type MillAlignment Tool for Bridgeport-Type Mill Quick View
  • Blank Aluminum Chuck Jaws Quick View
    • Blank Aluminum Chuck Jaws Quick View
    • ,
    • Blank Aluminum Chuck Jaws

    • $150.00
    • * In stock for popular chucks * Bolt jaws on in place of permanent jaws * Machine in place for perfect accuracy and concentricity * A must for holding pistons while cutting ring grooves or facing flat tops * Spiders also available * Complete instructions Specify exact chuck specs including: Make, Model No. & Size
    • Call To Place Order
  • CARBURETOR JET ORGANIZERS Quick View
    • CARBURETOR JET ORGANIZERS Quick View
    • ,
    • CARBURETOR JET ORGANIZERS

    • $20.00
    • Tired of searching through the tool box for a set of jets you saw "just the other day"?   Eliminate this common problem with these handy jet organizers.   Available for Holley, Rochester or Carter  (PLEASE SPECIFY WHEN YOU PURCHASE) Each Organizer Bar Holds 32 Jets Slim/Trim Design Allows Easy Carrying & Storage Attach Several Together with a Key Chain…
    • Order Online
  • CHAMFERING TOOL ~ ROD OR MAIN BEARING Quick View
    • CHAMFERING TOOL ~ ROD OR MAIN BEARING Quick View
    • ,
    • CHAMFERING TOOL ~ ROD OR MAIN BEARING

    • $85.00
    • If you have to use a breaker bar instead of a ratchet to turn your short block over, you might check this tool out (among other things).   Race cranks have a big fillet to reduce stress risers of sharp corners.  Bearings are not made for this large radius, and many times must be chamfered for clearance.  This tool is…
    • Order Online
  • Connecting Rod Center-to-Center Fixture Quick View
  • CRANKSHAFT V-BLOCKSCRANKSHAFT V-BLOCKS Quick View
    • CRANKSHAFT V-BLOCKSCRANKSHAFT V-BLOCKS Quick View
    • ,
    • CRANKSHAFT V-BLOCKS

    • $200.00
    • Finally, a quick and accurate fixture for postioning a crankshaft on a mill table! FEATURES: *Universal Application ~ Will Hold Any Crankshaft *Keyed Base Assures Perfect Alignment *Ideal for: Cross Drilling ~ Milling Key-Ways ~Checking Stroke Consistency & Many Other Milling & Drilling Operations *Includes:  Keys, Caps & Bolts *CNC Machined from Billet Aluminum *Anodized for Appearance & Durability
    • Order Online
  • CYLINDER HEAD FIXTURE w/ FLYCUTTER & STUB ARBOR OR R-8CYLINDER HEAD FIXTURE w/ FLYCUTTER & STUB ARBOR OR R-8 Quick View
    • CYLINDER HEAD FIXTURE w/ FLYCUTTER & STUB ARBOR OR R-8CYLINDER HEAD FIXTURE w/ FLYCUTTER & STUB ARBOR OR R-8 Quick View
    • ,
    • CYLINDER HEAD FIXTURE w/ FLYCUTTER & STUB ARBOR OR R-8

    • $925.00
    • $650 Cylinder Head Fixture Only (call to order) This Fixture Really Adds Versatility to Your Vertical Milling Machine Provides operator with quick, rigid setups on what used to be impossible or cumbersome items. *Great for Holding Intake Manifolds *The flycutter NOW comes with a REPLACEABLE Carbide Insert Tool Holder.  One insert for Cast Iron and one insert for Aluminum heads are…
    • Order Online
  • ENGINE BALANCING FIXTURE Quick View
    • ENGINE BALANCING FIXTURE Quick View
    • ,
    • ENGINE BALANCING FIXTURE

    • $300.00
    • Any machine shop will agree that the time consuming part of balancing an engine is weighing and equalizing the rods and pistons.  Spinning the crank and adding Mallory or drilling to remove weight is the easy part.  The PMS Balancing Fixture allows you to do all of the time consuming (expensive) work yourself.  You can now take your crank, harmonic…
    • Order Online
  • Flycutter Setting Fixture Quick View
  • GAS PORT DRILLING FIXTUREGAS PORT DRILLING FIXTURE Quick View
    • GAS PORT DRILLING FIXTUREGAS PORT DRILLING FIXTURE Quick View
    • ,
    • GAS PORT DRILLING FIXTURE

    • $250.00
    • * This fixture is designed to allow racers & engine builders to drill gas port holes using a drill press or vertical mill * Anodized Aluminum Construction * Accepts .043 or 1/26" Ring Groove * Two .040 (No. 60) Drill Bits * One Specially Ground Center Drill Included Complete Instruction Sheet with Pictures & Helpful Hints $5  Extra Center Drills…
    • Order Online
  • Piston Arbor Quick View
    • Piston Arbor Quick View
    • ,
    • Piston Arbor

    • $60.00
    • This tool is used in the lathe to cut pistons for “Tru Arcs” if you are changing from pressed to floated pins. Some customers have asked about bolting the tool to a piece of angle iron and using it as a piston vise in a mill ~ we sell a real piston vise. However, it does work well for holding…
    • Call To Place Order
  • Piston Ring Filer Quick View
    • Piston Ring Filer Quick View
    • ,
    • Piston Ring Filer

    • $60.00
    • This offers a quick and efficient means of properly filing ring end gaps. *Grinds the ring from the outside to the inside *Both sides of the gap are ground in one operation and are held parallel. *Replaceable carbide blade *Easily bolts to bench for hands-free operation $20  Piston Ring Filer Replacement Blades
    • Call To Place Order
  • Piston VisePiston Vise Quick View
    • Piston VisePiston Vise Quick View
    • ,
    • Piston Vise

    • $700.00
    • Nothing on the market today compares with the quality of this vise. This is the best constructed, most rigid vise available for flycutting or milling pistons. CHECK OUT THESE FEATURES: Set up is off of the pin hole which insures that all pistons will be positioned the same. Superior engineering and workmanship assures excellent repeatability. Only the highest quality materials…
    • Call To Place Order
  • Ring Spacer Gas Porting Fixture Quick View
    • Ring Spacer Gas Porting Fixture Quick View
    • ,
    • Ring Spacer Gas Porting Fixture

    • $200.00
    • Perfect for Stock Eliminator & Crate Motor Classes Where Modifying Pistons (Gas Porting) Is Not Allowed Absolute Power Gain Technique Used By Most Top Stock Eliminator Engine Builders Fixture Makes It Easy and Accurate With the Use of Any Mill 6061 Anodized Aluminum ~ CNC Machined Fixture is Keyed & Drilled & Counterbored For Accurate Alignment ~ Two 5/8" Keys…
    • Order Online
  • Rod ViseRod Vise Quick View
    • Rod ViseRod Vise Quick View
    • ,
    • Rod Vise

    • $175.00
    • An Absolute Must for Resizing or Installing New Rod Bolts Anodized Aluminum & Steel Construction Eliminates Bent or Twisted Rods or Caps Aluminum Jaws Will Not Mar Finish, Yet Hold Rod Securely Unique Base Design Allows Clamping in Bench Vise OR May be Permanently Mounted Holds Rod for Beam Polishing or Grinding
    • Order Online
  • Safety Wire Drilling Fixture Quick View
    • Safety Wire Drilling Fixture Quick View
    • ,
    • Safety Wire Drilling Fixture

    • $75.00
    • No More Excuses! Now you can easily drill any bolt for safety wiring. *Accepts Bolts from .198" to .562" in Diameter *Works on All Hex Head or Socket Head Bolts *Design of Fixture Actually Clamps Bolt to Ensure Straight Holes and Prevent Drill Breakage *Fixture is Complete with Two Bushings and Two .062" Drill Bits *Anodized Aluminum Construction for Appearance…
    • Order Online