Skip to content
-
-
- call, Tools
-
$30.00
- This is the good stuff. Works great on intake runners and manifolds. Molds like clay and maintains the formed shape without sagging or running. Stays where you put it ~ gas or alcohol doesn’t hurt it. Sets up harder than Superman’s Head in about 3 hours, yet machines very well. Forget the exhaust ports ~ it lasted 3 pulls on…
- Call To Order
-
-
- call, Diagnostics
-
$35.00
- *Fits both cup & ball type rocker arms *Eliminates trial and error fittings ~a must for making correct length pushrods *Simply adjust pushrod length to yield desired rocker arm geometry, measure sample and cut length correctly the first time
- Call To Order
-
-
- call, Machine Fixtures
-
$40.00
- This is one of the handiest tools you’ll use around your mill or drill press. Simply insert tool into chuck and move table in or out until both dowels contact shaft simultaneously, and you are exactly centered over the workpiece. Fast, accurate and illustrated in our “Bridgeport Mill Video”.
- Call To Place Order
-
-
- call, Diagnostics
-
$120.00
- This is what you use to mike bearings. It is common knowledge that all bearings are not the same thickness. By juggling bearing thickness, a lot of clearance problems can be eliminated. * .0001 Graduation * Carbide Faces (Anvil & Spindle) * Wrench Included for Quick Zero Adjustment
- Call To Place Order
-
-
- call, Machine Fixtures
-
$150.00
- * In stock for popular chucks * Bolt jaws on in place of permanent jaws * Machine in place for perfect accuracy and concentricity * A must for holding pistons while cutting ring grooves or facing flat tops * Spiders also available * Complete instructions Specify exact chuck specs including: Make, Model No. & Size
- Call To Place Order
-
-
- call, Tools
-
$45.00
- These simple little tools take a lot of work out of handling and transporting heads, blocks or entire engine assemblies. Simply thread into any 3/8” 16 tpi bolt hole and you have an instant handle. NOTE: Be sure to screw handles in flush with block/head to prevent bending screws. Set includes: 4 aluminum handles Heat-treated ~ 8 3/8” 16…
- Call To Place Order
-
-
- call, Diagnostics
-
$75.00
- This fixture is perfect for degreeing a camshaft because when the unit is screwed into the deck surface, the stem of the indicator is always parallel to the lifter bores. * Tool is machined & black anodized * Complete with 5” extension for reaching down to filter *1/2” & 7/16” threaded shaft fits most blocks (other threads available upon request)…
- Call To Place Order
-
-
- call, Tools
-
- Perfect for Finishing or Clean Up * Aluminum Oxide (Resin Bond) * 24 ~ 40 ~ 60 ~ 80 ~ 120 Grits * Extra-long Mandrels * 3/8 x 1 ½ inch or 5/8 x 1 ½ inch in Stock *2” Flap-Wheels in 60 or 120 Grit $55 Cartridge Rolls 3/8" ~ Grit: 40/60/80/120 (Box of 100) $70 Cartridge Rolls…
- Call To Order
-
-
- call, Machine Fixtures
-
$275.00
- This fixture allows the operator to quickly and accurately measure rods for precise center to center distances ~ or compare rods before and after resizing. * Takes a lot of work out of setting deck height * Reveals how much material to grind from the cap or rod to even out center length * Compare a number of rods to…
- Call To Place Order
-
-
- call, Diagnostics
-
- This is a copy of the P&G Gauge with a lot more capacity with the same accuracy. This tool is a must for any track or organization running events with a cubic inch limit rule. Eliminate pulling heads and still keep them honest. Tester is accurate within ½ C.I. Per cylinder (total of 4 cubic inches for a V-8). A…
- Call To Place Order
-
-
- call, Diagnostics
-
$110.00
- You will find yourself carrying this tool around like a pocket knife. How many times have you been caught trying to figure out if a block is standard ~ .030 or .060 over and all you have is a tape measure? SPECIAL FEATURES: * Carbide-faced measuring tips are spherical to make positive point contact against the cylinder walls. * Graduations…
- Call to place order
-
-
- call, Diagnostics
-
$300.00
- * Checks block for “CORE SHIFT” or dangerously thin cylinder walls before spending time & money on an inferior block * Fits cylinder bolt holes or water jacket holes * Tool is fast & accurate to .001” * Easily does the job of an ultrasonic tester at a fraction of the cost
- Call To Place Order
Call Now
